Posts Tagged ‘Code’

Oki Develops Industry’s First Long-wave Time Code Receiver LSI using SOI-CMOS Technology

Friday, April 29th, 2011

Oki Develops Industry’s First Long-wave Time Code Receiver LSI using SOI-CMOS Technology











Tokyo, Japan, (PRWEB) October 21, 2003

Oki Electric Industry Co., Ltd. (TSE: 6703) announced today that it has developed a long-wave time code receiver, the ML6190A, based on SOI-CMOS (silicon-on-insulator complementary-metal-oxide-semiconductor) technology, an industry first. By using fully depleted SOI-CMOS technology, the chip realizes high sensitivity radio reception functionality, together with a one third or better reduction in power consumption compared to the existing time code receivers. Oki has already started sample shipment, and is planning for volume shipment to commence December 2003.

“Oki succeeded in volume production of watch-use LSIs using the SOI-CMOS technology last year, and we have now become the industry’s first provider of long-wave time code receivers using this technology,” said Masao Sasaki, Manager of SOI Business Development in Silicon Solutions Company at Oki Electric. “As a leading vendor in SOI technology, we will continue to offer ultra-low power consumption LSIs, to meet our customersf requirements.”

The ML6190A uses fully depleted SOI-CMOS technology, which involves forming a CMOS on an SOI substrate in which an insulated film is buried, instead of a silicon substrate. As transistors are created on an insulation film, the chip consumes quite low power current, which in turn, decreases the concomitant@thermal noise. Noise transmitted from a substrate is also decreased, as transistors are completely isolated from the substrate by an insulation film. This mechanism realizes high sensitivity.

As the power current is one third or better compared with the existing time code receivers, the ML6190A is most suitable for small, portable devices. It is also applicable for time correction of audiovisual equipment, home appliances, PCs and car clocks.

SOI-CMOS technology also excels in the level of integration of digital and analog circuits into a chip, because transistors are completely isolated from a substrate by an insulation film, which reduces the noise transmitted to analog circuits from digital circuits via substrate. Based on this technology, Oki plans to integrate a receiver circuit with a decoder circuit, a driver circuit, or a watch-use LSI and enhance the product line-up.

Major characteristics and features:

The ML6190A is an RF receiver for time code signals transmitted over long-wave frequencies ranging from 40KHz to 100KHz. Voltage sensitivity is 0.7µVrms and the input voltage range is from 0.7µVrms to 100mVrms. The current consumption is 17µA, which is from one third to one tenth of that of bipolar devices. By using two connected crystals, the ML6190A receives two different radio frequencies.

Radio signal sensitivity: Typ. 0.7µVrms


Input voltage:     0.7µVrms to 100mVrms

Supply current:     Typ. 17µA (@3V)

Supply voltage range:     1.1V to 3.6V

Reception frequency range:    40KHz to 100KHz

Operating temperature range: -40C to 85C

Shipment schedule:

Sample shipment:             Now

Volume shipment:             December 2003

Glossary

Silicon-on-insulator (SOI):

Substrates with a thin silicon layer on an insulation film, or devices built on these substrates. MOS transistors produced with SOI have superior performance in low operation voltage. There are fully depleted SOIs and partially depleted SOIs. Fully depleted SOIs realize both low operation voltage and low load capacitance simultaneously, but require a very thin silicon layer for forming transistors, which is 50 nm or less.

Notes:

Names of companies and products are trademarks or registered trademarks of the respective companies.

About Oki Electric Industry Co., Ltd.

Founded more than a century ago in 1881, Oki Electric Industry Co., Ltd. is Japan’s first telecommunications manufacturer, with its headquarter in Tokyo, Japan. With the corporate vision, “Oki, Network Solutions for a Global Society,” Oki Electric provides top-quality products, technologies and solutions to its customers through its telecommunications systems, information systems and electronic devices segments. All three segments are integrated into one effective organization that functions as a collective force to create exciting new products and technologies, including information and telecom converged solutions. Through its business activities, Oki Electric satisfies a spectrum of customer needs in various markets. Visit Oki’s global web site at http://www.oki.com/.

###


















Vocus©Copyright 1997-

, Vocus PRW Holdings, LLC.
Vocus, PRWeb, and Publicity Wire are trademarks or registered trademarks of Vocus, Inc. or Vocus PRW Holdings, LLC.







Crack The Secret Code

Sunday, August 22nd, 2010

Fireball Books to http://FireballBooks products. com – Current promotion: Crack The Secret Code http://CrackTheSecretCode. com – Membership, Join us toll free at: http://HotJV. com
Crack The Secret Code

Analysis of IBM error code, IBM Common Error Error 2010 1082 0271 Fan

Tuesday, August 10th, 2010

10X101: interruption102 Error: Error horloge103: time interruption104 failure: failure mode protégé105: Last 8042 command not accepté107: NMI108 test failure: failure of test clock bus109: Low meg chip board will a test system. Nm110 memory locations memory parity detection plane when connected to a computer system motherboard to remove the extension of pièces111I / O expansion memory parity detection elements or the system motherboard port.11xx1101 replicator: A class of device failure detection system wiring board serial device communication12XX1201: detection of type B was not the system board (IR) 158 is set Supervisor password, but not set password HDD is going passe159 HDD and the password is not the same set Supervisor password HDD password and the same SuperVisor161 backup battery backup failure of the battery detection system board . Time and date is not set 163 to set the time and date of the card système.173 equipment, loss of data on the screen, click OK, then set the time and date of the Board Administration of the battery system is set sauvegarde.174 error: the list of equipment first installed testing, then change the parts FRU difficult to detect peripheral card reader system configuration.0175 CRC1 wrong, the task of stop POST. EEPROM checksum error. smart security system bord0177 Supervisor password wrong test card systèmeErreur 0178EEPROM système2010 card firmware dur17XX1701 disk: Disk controller failure dur1780, 1790: Hard drive 0 Erreur1781, motherboard 1791: Hard error system disk dur183 administrator password when prompted enter the wrong password to enter the correct SuperVisor184 power on password to enter the BIOS settings wrong test to reset the password démarrage185 illegal access to parameters BIOS boot sequence reset sequence démarrage1861 card système0187 EAIA error reading data. EEPROM read failure. card RFID système0188 region CRC2 illegal or wrong information continues. EEPROM checksum error. map area système0189 illegal RFID continuous disclosure. EEPROM checksum error. map système0190 low battery error loading the battery compartment batterie0193 RF antenna has been deleted. supervisor input (Super) Password passe0194 notebook is made by the head of security inspection gate (Super) Password passe0195 security hardware security input disturbance supervisor (super) password to access the BIOS setup utility, select Setup, select the IBM Security Chip, select ClearIBM security chip to erase the chip system error security bord0196 safety equipment removed the entry safety supervisor (super) password to access the BIOS setup utility, select Setup, select the IBM Security Chip, select Clear IBM Security Chip to clear this chip system error security bord0197 illegal modify the requirements of remote configuration of the remote vulnerability of the security chip. To confirm the operation and try nouveau.01C8 multiple modem device – removal of one of press Esc to continue. Removing a MiniPCI card modem or modem daughter card, or press Esc to ignore the error. Mère01C9 map several network devices class – the removal of one of press Esc to continue. Removing a MiniPCI Ethernet card or an Ethernet daughter card, or press Esc to ignore the error. Mère0200 Card hard drive error. The hard non-work. Re-install the hard drive (demolition) in the BIOS setup utility to restore the default system disk card mère021x keyboard error running interactive keyboard and auxiliary device testing entrée0220 Standard error monitor. Monitor type does not match the definition CMOS. In the BIOS setup utility to restore the settings défaut0230 Plan of memory error. mapping error in the memory offset nnnn. map système0231 failure of system memory. error in the system memory offset nnnn. System Memory Map mère0232 expanded memory wrong. Extended memory error in the offset nnnn. Memory. map système0250 battery system error – System battery damage replacement battery backup, run the setup utility for IBM BIOS reset the date and time .0251 A system error CMOS control – the default settings using the backup battery replacement, run the Configuration Utility for IBM BIOS reset the date and time checksum error .0252 Password – password is allowed to enter the IBM BIOS settings and clear the password Password (Reset) 0260 replacement battery backup system time error, run the Configuration Utility for IBM BIOS reset the date and time. mère0270 card real time clock wrong replacement battery backup, run the Utility IBM BIOS setup to reset the date and time. Map mère0271 date and time wrong. Computer has not set a date or time. Run the setup utility to reset the IBM BIOS date and incomplete heure0280 Start error – The default setting for use in the BIOS setup utility to restore IBM memory by default. map système02B2 Incorrect drive A floppy disk disquelecteur externeCarte E / S02F4 EISA CMOS not write to the configuration utility to restore the IBM BIOS default settings replace the battery backup memory card mèreTest not 02F5 memory. map not systèmeLogiciel NMI 02F6 memory. map système02F7 Fail-safe timer NMI failure of memory. map système1801 connected to the docking station does not support Turn off the computer and network card retirez1802 unauthorized inserted – and then remove the miniPCI network card installed remove the miniPCI network card. map systèmeconflit address Peripheral address conflict périphériqueDans the BIOS setup utility to restore the default settings the system motherboard battery secoursErreur allocation for the device: Error positioning équipementsDans Utility BIOS Setup to restore the default system motherboard battery failure secoursA bits: nnnn-bit memory card slots nonSystème DIMMBlancs configuration database system: illegal configuration data of memory card slots systèmeSystème DIMM / O device IRQ conflict: I / O device IRQ conflitDans the BIOS setup utility to restore the default system motherboard battery operating secoursSystème not found: no system error exploitationVérifiez operating system and is not installed correctly. Accessing the Configuration Utility IBM BIOS checks the hard disk or floppy disk is properly reconnuRéinitialiser disk to reinstall the operating system hard drive motherboard system disk drive disqueErreur Hibernation: Error HibernateRestaurer settings system into the sleep state if the memory capacity before replacement, and re-create the hibernation file (delete c: hibernation file reentry following) error Fan: fan of erreurVentilateurThermique error detection sensor error thermiqueCarte mother1. Click OK on the error screen, then set the date and time. (Error in the start screen, press OK, then set the system time) 2. Battery backup. (CMOS battery must be replaced) 3. system board. (Problem of motherboard) 163 (Time and date have not been established.) (System time not set right or confusion) 1. Set time and date. (To set the system in good time) 2. system board. (Problem of motherboard) 192 (Standard fan.) (CPU cooling fan failure) 1. Measure the voltage of the battery backup. If the voltage is not correct, replace the backup battery. (Check the voltage CMOS backup battery, replace the battery voltage does not work) 2. Fan (to replace the CPU fan) 3. system board (motherboard problem) Related: Sony VGP-BPS8 battery Sony VAIO VGN-FZ Series Battery Dell Studio XPS 16 Battery

Fingerprint Access Code + by Lock (Gold Edition)

Friday, April 9th, 2010

fingerprints double action and has the access code security lock for your home, office or small business. Get modern biometric security to your entry point to the door handle style door locks standard double action. This is the safest method and practice to ensure only authorized persons have access to private rooms in your home or office. Anyone needing access to a room with the CVKJ J15-installed on the door will put their finger on the fingerprint sensor and / or enter a password to unlock the door. The beauty of this door lock fingerprint is found in both security and ease of use it offers. This door lock fingerprint keyless entry allows easy with fingerprint identification or PIN number for authorized personnel, while preventing unauthorized access room for everyone. What you get with this door lock fingerprint is total peace of mind with a security guarantee for the 21st century, which means the lock can not be taken or avoided. If someone is not authorized to access a room or building, they will never be able to enter. With its motion detector advanced 3D sliding coverhatch the CVKJ-J15 can handle all weather, all light conditions, and can never be fooled by fake fingerprints (such as molds or reproductions of photos ). Make this model, the input system perfectly safe for your entire house or large office doors small – period! Since CVKJ-J15 can be installed on doors in wood or metal which are industry standard 35-50mm thick, it is perfect for almost every home or office door style solid core. Rooms typical that may need this kind of system is a gateway, private school Master Bedroom Executive Room Managers Financial Records Office computer room Home> News Room Office Suite entry door Villa Mansion Gate and more. . . When it comes to the quality of this unit can not be beaten. A perfect example of technology without compromise Swedish engineering associated with excellence in design in Taiwan. The main advantage of this quality model is the use of 3-D optical sensor rather than a sensor type 2-D digital, and the use of an advanced surface coating to keep the area detecting electrical machine readable “, even after thousands of slides fat finger. This advanced technology ensures the consistency of long-term stability and security unbeatable, making unauthorized access to a room impossible, while allowing the model to run without maintenance. In addition to safety, comfort and reliability, this gorgeous print ID entry system comes in a classic gold finish will complement most home and your office classic. With unbeatable wholesale prices factory direct, you get a fingerprint of high security specification entry door lock just can not be found anywhere else at this price! Order yours today and we ship it out of our warehouse tomorrow! In brief. . . door entry system with fingerprint entry code + keyless access by fingerprint or code access stores up to 50 fingerprints executive style home or office top quality, directly from manufacturer’s factory price Product Description: Fingerprint and locking the door security code for home or small office users first-hand: all metal casing with galvanized finish gold Fingerprint Sensor Type Sensor 3D technology to detect fingerprints Sweden and Taiwan Design Storage Capacity: 50 fingerprint Open lock modes: Fingerprint, Password, ID, Mechanical Adaptability key to the door thickness: 35mm ~ 50mm Biometric Type Sensor: optical 3D sensor biometric sensor life: 1,000,000 slips false rejection rate (FRR): = 0. 1% false acceptance (FAR): = 0. 001% audit and comparison time: 1s Audit Type = 1: N PIN maximum storage: 2 Type of mechanical locking: standard cylindrical / tubular lock primary controls / indicators: – fingerprint sensor – Retro -Sensor LED lighting – Keypad – Included Hole mechanical key – handle – Integral Slide Up / Down Cover Power Source: 4x AA batteries Autonomy: 12 months Operating Temperature: -10 to +50 C Operating Humidity: 0 to 85% HR Certifications: CE and FCC Dimensions – outside (excluding handle): 65mm x 150mm x 40mm (W x H x D) – Inside (excluding handle): 65mm x 150mm x 30mm (W x H x D ) Manufacturer Ref: Notes GSP4NQATMW9 product of this handful of fingerprint lock is set for right hand use when installed fingerprint sensor in 3D that is used by the Swedish Defence and 4 more major banks in China Included in the kit are a set of 2 mechanical keys can also be used to unlock the door. These are normally kept by the owner of the building in case of emergency. Read the manual carefully before installing and using this product in order to achieve more satisfying user experience. The installation is so easy that anyone can install in less than 30 minutes. It can be installed on any doors in wood or metal which are industry standard 35-50mm thick, and uses the standard latch and lock companies fingerprint ID is the ultimate in convenience. No more digging through your purse or pocket for your keys, no more changing of the lock, after a suspicious activity workers home, no more buttons hide under rocks or flower pots. Everything you need to do is slide the protective cover and place your finger on the sensor for authorized access to a room. There is nothing easier than that. Package Contents – Model J15-CVKJ extra door handle inside door handle of the Assembly Assembly Strike plate cylinder + Lock Mounting Hardware Master Keys (2) Manual – English FAQ – Frequently Asked Questions Why the keypad marked 1 2 3 8 and not 1 2 3 4? In some Asian countries the number 8 is considered lucky, while 4 is unlucky. So we’ve given you a keyboard very lucky (especially good if the door is on your bedroom door!). The door of my master bedroom is fitted with a tubular lock. Can I change the lock Fingerprint CVKJ-J15 hassle? Yes, you can make direct replacement of the lock tubular lock with fingerprint CVKJ-J15. Installation is fairly simple with just a screwdriver. The lock Fingerprint CVKJ-J15 have a low battery warning? Yes. When you slide the cover up and hear the threefold BiBiBi instead of the normal one Bi sound, then the battery is low. You can still use the device almost 100 times. However, change the batteries immediately when the low battery warning, because once the battery dies, you can open the door with the keys (and there are only two). This is very important if you own a business, because you do not want to lock out employees. Is the Waterproof CVKJ-J15? No, the device is water resistant but not waterproof. Meaning any exterior door that is located in an area well covered where there will be no rain or snow contact is acceptable, but the unit can never be directly exposed to constant water contact. Then the fingerprint CVKJ-J15 door lock false sense fingers? Yes. individual sensor elements of CMOS sensor 3D can feel both the touchpad and the load of the skin of the finger to obtain a 3D image of the fingerprint. He rejects the false as photocopies, photographs, waxed, fake fingers, and even dead fingers can not fool the sensor 3D! We have used sensitive, they are concerned about a machine to store their fingerprints. What can I say? This model stores the data fingerprints in a type of military grade encrypted file which is readable only by that machine. In addition, the fingerprints are stored as data and not as images. What is the difference between a lock and fingerprint traditional tubular lock? Why should I upgrade to a lock fingerprint? A fingerprint lock brings added convenience keyless your daily life. Your finger is the key, so it is always with you! The J15-CVKJ with advanced performance features makes an input interface easy to use for your daily life. How do I access the keyhole when there is coverage on him? Using the tip of your thumb, you can push the lid, then use your other hand to lift the lid and keep it fully open while you insert the key. Log wholesale discount prices Written by: Photos & Graphics by OD: LH Visit: http://www. electronicschinawholesale. comYou find more. Current Reviews: This product was added to our catalog Wednesday, September 23, 2009.